Dairy Refrigeration Tank Cold Milk Tank Cooling Milk Tank Milk Fresh-Keeping Tank

Basic Info

Application	Milk, Yogurt
Customized	Customized
Material	SS304
MOQ	1 Set
Function	Cooling and Storage
Voltage	Customized or 380V/22V
Condition	New
Type	Vertical &Horizontal
Transport Package	Wooden Box/Case Package
Specification	Variable
Trademark	WS
Origin	Shanghai, China
Production Capacity	53sets/Month

Product Description

Description:

Bulk milk cooler/Milk cooling tank is used for storage and cooling the fresh milk of pasture and farm, it also can be used for small milk collection station, dairy processing plants, and food, feed, pharmaceutical factories.

Milk cooling tank is made up tank body, agitator, refrigerating unit and control box.The tank body is made of stainless steel 304, and be minutely polished. Insulation is filled by polyurethane foam, light weight, good insulation properties.

RFQ parameters of Stainless steel milk cooling mixing tank with dimple jacket
Material:	SS304 or SS316L
Work Temperature:	0-200 °C
Volumes:	100~50000L
Construction :	Vertical type or Horizontal type
Jacket type :	Dimple jacket
Agitator type:	Paddle, anchor, scraper, homogenizer, etc
Structure :	vessel with jacket and insulation
Heating or cooling function	According to the heating or cooling requirement ,the tank will have jacket for requried function
Opitional Motor:	ABB, Siemens, SEW or Chinese brand
Surface Finish:	Mirror Polish or Matt polish or Acid wash&pickling or 2B
Standard components :	Manhole,sight glass , cleaning ball,
Optional components :	Vent filter, Temp. Gauge, display on the gauge directly on the vessel Temp sensor PT100

Requirements before installation:
1. Must be careful when you carry it, do not tilt more than 30°to any position.
2. Check the wooden case, make sure it is not damaged.
3. The refrigerating fluid has already been filled into the unit, so it is not allowed to open the valve of the compressor unit during transportation and and storage.

Location of work house:
1. The work house should be spacious and good air liquidity. There should be an one-meter passageway for operator working and maintain. When it is mechanized milking, you should consider about the connection with other equipment.
2. The foundation of the milk tank should be 30-50 mm higher than the floor.

Installation of milk tank:
1. After the milk tank got in position, please adjust the feet-bolts, make sure the tank tilt to the discharge hole, but not too much, just can discharge all the milk in the tank. You must make sure the six feet uniform stress, do not allow any foot be drift. You can adjust the left-right slope by Horizontal scale, make sure it is not slope to left or right.
2. Switch on the inlet of condenser.
3. The equipment switch on electric power must switch on the earth.

 

Advantages

Certification	25 National Patents, Audited by SGS/CE/ISO9001
Quality Guarantee	Complaint rate as low as 5‰ for 15 years. If you decide to purchase from us, any malfunction happened, once you enquiry us, we will reply you solution within 48 hours except the special reasons
Short Lead Time	Lead time is flexible. Short turnaround of replacement parts made by substantial storage, Normally we are 20% faster than others. If you have urgent orders, pls feel free to contact us. We will get the job done with 100% satisfaction.
24/7 Available	All your inquiry will be responded within 1 hour. All your quotation will be satisfied within 12 hours.
Why choose us?	•100% manufacturer • Rich production experience •Strict Quality Control System •Flexible MOQ •Punctual delivery •Excellent and Experienced Team